Differences

This shows you the differences between two versions of the page.

--- te3:dynamic_skimming [2014/09/24 15:39] – moderator
+++ te3:dynamic_skimming [2016/03/18 22:35] (current) – [Network sync] moderator
@@ Line 8: / Line 8: @@
-If traffic on your site decreses for one reason or another (server issues, bad set of thumbs, off-peak hours...), you can give it a little push to normalize it again. One way of doing this, is by temporary sending part of the traffic, that would normally be sent to galleries, to trades instead. If trades get more traffic, they also send more in return, hence overall traffic on your site should increase. "Dynamic skimming" module can automatically adjust skim values on your site, based on the conditions you set.
+If traffic on your site decreses for one reason or another (server issues, bad set of thumbs, off-peak hours...), you can give it a little push to normalize it again. One way of doing this, is by temporarily sending part of the traffic, that would normally be sent to galleries, to trades instead. If trades get more traffic, they also send more in return, hence overall traffic on your site should increase. "Dynamic skimming" module can automatically adjust skim values on your site, based on the conditions you set.
 To **enable dynamic skimming** open "Tools / Dynamic skim" pop-up, check ''Enable dynamic skim'' option in the toolbar and <color red>set at least one condition</color>. By default, dynamic skimming module is disabled.
-It is always advisable to [[te3:interface_manager|enable]] ''Skim %'' and ''Skim pattern'' columns in the Overview menu, when you are managing skimming.
+It is always advisable to [[te3:interface_manager|enable]] ''Skim %'' and ''Skim pattern'' columns in the [[te3:overview|Overview]] menu, when you are managing skimming.
 ----
@@ Line 29: / Line 29: @@
 Note that including ''Bookmarks'' could temporarily increase your ''Clk T'' but you also run a serious risk of loosing (at least some of) those Bookmarks in the long run (you increase the chance they will get redirected and decrease the chance they will get to the content and they probably won't like that).
-''Even if skim value is 100'': if skim value is set to ''100'' there is a 100% probability, a surfer will be sent to galleries. When you enable dynamic skim ''Even if skim value is 100'', you reduce this probability by a specified percent (see examples below).
+''Even if skim value is 100'': if [[te3:skimming|skim]] value is set to ''100'' there is a 100% probability, a surfer will be sent to galleries. When you enable dynamic skim ''Even if skim value is 100'', you reduce this probability by a specified percent (see examples below).
 ----
@@ Line 35: / Line 35: @@
-To add a new condition, click on the {{:te3:add_button.png?nolink|}} icon in the "Existing conditions" table, specify new condition and click ''Save'' button. You can add as many conditions as you like, but probably you will need just one or maybe a few. If you will add multiple conditons, they will be processed in the same order as they appear in the "Existing conditions" table (from top to bottom). If multiple conditions are fulfilled, skim value will be dynamically adjusted based on the first condition. You can change priority of the conditions by dragging them up or down the list (use ''Drag'' icon).
+To add a new condition, click on the {{:te3:add_button.png?nolink|}} icon in the "Existing conditions" table, specify new condition and click ''Save'' button. You can add as many conditions as you like, but probably you will need just one or maybe a few. If you add multiple conditions, they will be processed in the same order as they appear in the "Existing conditions" table (from top to bottom). If multiple conditions are fulfilled, skim value will be dynamically adjusted based on the first condition. You can change priority of the conditions by dragging them up or down the list (use ''Drag'' icon).
 ++++ Examples |
@@ Line 58: / Line 58: @@
 ===== Network sync =====
-[[te3:network_sync|Network sync]] function allows you to copy all settings from the Dynamic skim pop-up to the other sites in your [[te3:network|network]]. To proceed, select sites from the multiple select box and click Save button.
+[[te3:network_sync|Network sync]] function allows you to copy all settings from the Dynamic skim pop-up to the other sites in your [[te3:network|network]]. To proceed, select sites from the multiple select box and click ''Save'' button.
 ----