TradeExpert Docs te3

te3:add_trade

Anonymous (anonymous@undisclosed.example.com) — 2014-08-08T11:05:18+00:00

Add trade Overview / Add trade TE3 offers you several different methods to add new trades to your site. Navigate to the Overview menu, click on the Add trade button and select a desired action: # Action Description 1. Add trade add single trades to your site.

te3:add_trade_bulk

Anonymous (anonymous@undisclosed.example.com) — 2014-11-26T05:56:29+00:00

Bulk add trades Menu: Overview / Add trade / Bulk add trades To add multiple new trades, open “Bulk add trades” pop-up window: navigate to the Overview, click on the Add trade button and select Bulk add trades from the drop down menu. Add one trade per line into the textarea.

te3:add_trade_default_values

Anonymous (anonymous@undisclosed.example.com) — 2014-11-10T12:16:52+00:00

Default values Menu: Overview / Add trade / Default values Most of the settings for new trades can be preconfigured, which makes it easier and faster to add new trades (single or bulk) to your site. Open “New trade defaults” pop-up window: navigate to the

te3:add_trade_feeder

Anonymous (anonymous@undisclosed.example.com) — 2014-11-20T09:06:39+00:00

Add feeder Menu: Overview / Add trade / Add feeder (buy traffic) Sometimes the only way that a new, unknown site can get traffic to their website is by buying it. Competing with large sites is tough, and sometimes, search engine optimization techniques arent enough to boost a new sites rankings in the search engines. Even established large sites can benefit from using this method.

te3:add_trade_seller

Anonymous (anonymous@undisclosed.example.com) — 2014-11-24T09:52:42+00:00

Add seller (selling traffic) Selling traffic has priority over the rest of the outgoing traffic, even over owed forces. More traffic you sell, less of it is left available for outgoing distribution based on the trade algorithm. You can sell your traffic through special Seller trades. TE3 allows

te3:add_trade_single

Anonymous (anonymous@undisclosed.example.com) — 2014-11-14T12:52:36+00:00

Add single trade Menu: Overview / Add trade / Add trade To add a single trade to your site, open “Add trade” pop-up window: navigate to the “Overview”, click on the “Add trade” button and select Add trade from the drop down menu. Check out our

te3:add_trade_single_tutorial

Anonymous (anonymous@undisclosed.example.com) — 2014-12-30T07:25:49+00:00

Add single trades from the admin panel We'll be using a fictitious trade (http://www.yourtrade1.com/) for the purpose of this tutorial and you should replace it with your actual trade. Let's try and add one trade to your database: Step by step

te3:admin_panel

Anonymous (anonymous@undisclosed.example.com) — 2016-05-06T09:09:56+00:00

Admin panel introduction After you have successfully logged in from the TE Login page, “Admin panel” will open in your browser. It was was designed to be intuitive and user friendly for both beginner and experienced webmasters. ---------- Header at the top of your page allows you to perform the most basic actions in TE - switch between different

te3:advanced

Anonymous (anonymous@undisclosed.example.com) — 2014-12-04T06:32:03+00:00

TE3 ADVANCED GUIDE Maintenance Update manager Your TE3 will periodically check for updates (once a day). If there is an update available, there will be an exclamation icon displayed next to Maintenance drop down menu: Learn more Server moves Learn how to move your TE3 to a new server and preserve all the data.

te3:algorithms

Anonymous (anonymous@undisclosed.example.com) — 2018-02-12T07:59:35+00:00

Trade algorithms Menu: Overview / Edit trade / Advanced accordion You can choose between standard and fixed algorithms: 1. Standard algorithms These are the algorithms you will use most often. The default and most recommended algorithm is Value. Simplified calculations for standard algorithms are listed below.

te3:allowed_ips

Anonymous (anonymous@undisclosed.example.com) — 2015-07-13T18:13:05+00:00

IP protect your admin interface Menu: User / Allowed IPs * Allowed IPs * .htaccess * PHP files inside /te3/ directory Like it or not, hackers will try break into any script installed on your server and TE3 is no exception. After they gain access to the admin interface of the script, it is much easier to gain access to the server as well. Same goes for the opposite. If they gain access to your server they can change files owned by your user, meaning they can also overwritte legit TE3 …

te3:backup

Anonymous (anonymous@undisclosed.example.com) — 2014-11-12T19:42:56+00:00

Backup Menu: Tools / Backup In case of a data loss event (system failure, partial hard disk failure, accidental mass delete of trades...) you can restore original data from a backup. There are two methods to create a backup: * Automatically: backup is generated every 12 hours by default. To set a different time period navigate to

te3:basic

Anonymous (anonymous@undisclosed.example.com) — 2014-12-04T05:33:08+00:00

TE3 BASIC GUIDE Welcome to the “TE3 Basics guide”! This guide’s goal is to give you a quick overview of all the functions you may need in order to start traffic trading. It is organized to follow the logical process of a new TE3 user - getting familliar with our trading script, integrating it with your website, etc.

te3:blacklist

Anonymous (anonymous@undisclosed.example.com) — 2014-11-14T13:10:10+00:00

Blacklist Menu: Settings / Blacklist The purpose of the “Blacklist” is to prevent unwanted trades from signing-up through the Trade sign-up page. If you keep your “Trade sign-up page” closed, “Blacklist” has no meaning at all. Visual presentation Add record

te3:capping

Anonymous (anonymous@undisclosed.example.com) — 2016-03-30T12:32:39+00:00

Capping Menu: Overview / Edit trade / Capping Capping can have a huge impact on the outgoing traffic distribution. If it is not set properly, traffic on your site could decrease. Before you start using it, read this topic very carefully. Description

te3:cb_cbr

Anonymous (anonymous@undisclosed.example.com) — 2014-08-27T06:38:32+00:00

"Click back" and "Click back ratio" “Click back” and “Click back ratio” parameters are another useful TE3 tools for analysing traffic. “Click back” (CB) represents the number of surfers that were already sent out to a trade, but they “came back” to your site and clicked again - in other words, they closed the tab with your trade's website and continued clicking on your website.

te3:changelog

Anonymous (anonymous@undisclosed.example.com) — 2018-02-22T11:53:57+00:00

Changelog 3.324 22 February, 2018 Features: * “General settings” GeoIP update added input for GeoIPv6, * “General settings” Customizing and renaming TE3 modules signup.php can now also be renamed, * “Toplist” sort and conditions

te3:cheat_logs

Anonymous (anonymous@undisclosed.example.com) — 2014-11-17T06:37:20+00:00

Cheat logs Menus: Overview, Hourly, Pages TE3 logs IP addresses of all surfers who have visited your site over the past 24 hours. IPs that produced the most clicks get listed in the “Cheat logs” window, which greatly simplifies detection of repetetive occuring IPs and other types of abnormal traffic activities.

te3:convert_to_paid

Anonymous (anonymous@undisclosed.example.com) — 2014-12-12T10:05:34+00:00

Convert from free to paid licence Menu: Maintenance / Convert from free to paid licence We have free and paid version of TE3 available. Both versions are equal, except that the free version takes a small percentage of your traffic as a “payment”

te3:customizing_and_renaming

Anonymous (anonymous@undisclosed.example.com) — 2014-12-08T05:37:56+00:00

Customizing and renaming Settings / General settings / Customizing and renaming TE3 modules Each site should be as unique as possible - if the same link scheme, cookie names and directory structure repeat over and over again on hundreds of different sites, this can have a negative impact on search engine rankings.

te3:default_skimming

Anonymous (anonymous@undisclosed.example.com) — 2014-11-13T14:15:08+00:00

Default skim Menu: Tools / Default skim Skim is already set to default skim for all outgoing links on your site. You can set internal skim for individual trades or system trades (any or all) and it will outpower “default skim” for those trades. If you set

te3:directory_name

Anonymous (anonymous@undisclosed.example.com) — 2014-11-13T09:38:55+00:00

Why choose a unique directory name Search engine algorithms include hundreds of parameters, when they analyse and determine your site's rank. Our latest research has shown that unique site structure is one of the factors that may help a website's visibility in search engines.

te3:dynamic_skimming

Anonymous (anonymous@undisclosed.example.com) — 2016-03-18T22:35:22+00:00

Dynamic skimming Menu: Tools / Dynamic skim Dynamic skimming is an advanced feature for expert users with specific requirements. Before you start using it, you should carefully read and understand everything about “basic” skimming. If traffic on your site decreses for one reason or another (server issues, bad set of thumbs, off-peak hours

te3:edit_trade

Anonymous (anonymous@undisclosed.example.com) — 2014-12-12T08:19:42+00:00

Edit trade “Edit trade” function allows you to edit various parameters for a single trade. Choose Edit trade function for a desired trade in Action column and “Edit trade window” will open. ---------- Edit normal trades (active and inactive) Ten accordions in the “Edit trade” window allow you to fully customize settings for your

te3:external_feature

Anonymous (anonymous@undisclosed.example.com) — 2014-12-12T08:04:27+00:00

External feature Menu: Edit trade / External feature Description When you trade traffic, it should be in your best interest to send your trades as much Unique traffic as possible, because it is much more productive than Raw traffic. Higher percent of

te3:faq

Anonymous (anonymous@undisclosed.example.com) — 2017-04-05T06:57:13+00:00

FAQ 1. What do I do if I forget my password? 2. What happens if I have my IP on the Allowed list and my provider changes my IP? How will I be able to login to my TE3 admin? 3. Which algorithm should I use? 4. Can I create thumb toplists with TE3? 5. How do I disable Thumb Grabber? 6. I want to sell traffic from selected trades only? 7. How can I add the same seller domain multiple times? 8. How can I sell traffic to broker using skim schemes 9. Productivity question - what does ''Prod…

te3:file_integrity

Anonymous (anonymous@undisclosed.example.com) — 2014-08-08T13:04:17+00:00

File integrity check Menu: Maintenance / File integrity check This TE3 feature is your anti-hacker tool. MD5 sum checker algorithm computes a 128-bit hash value (also called checksum) - a 32 digit hexadecimal number for all your TE3 files except data files (obviously those cannot be sumchecked - they change as the data they include gets altered).

te3:forces

Anonymous (anonymous@undisclosed.example.com) — 2014-11-20T18:57:55+00:00

Forces Menu: Overview / Edit trade / Forces Forces are essential for effective traffic trading. You can use them to start-up new trades and to keep the existing trades stable. Send (force) specified amount of traffic to individual trades based on the force conditions set.

te3:general_settings

Anonymous (anonymous@undisclosed.example.com) — 2014-12-11T18:51:33+00:00

General settings Menu: Settings / General settings Import trade database from TE2.2 Enter full path (e.g. /var/www/cgi-bin/te/tedata/) and click . Read more about migrating from TE 2.2 to TE 3.0 here. ---------- CMS login URL By entering full path to your

te3:good_normal_bad

Anonymous (anonymous@undisclosed.example.com) — 2014-11-24T13:58:51+00:00

Good, normal and bad countries Menu: Settings / Good, normal, bad Demographic quality of the traffic is being measured by the “GNB module”, based on the country groups and their weights. 1. Detect potential cheaters You can decide a certain trade is sending you to much

te3:history

Anonymous (anonymous@undisclosed.example.com) — 2014-12-12T06:11:31+00:00

History History menu is further divided into two submenus - Simple history and Detailed history and it allows you to monitor and analyse various historical stats and graphs for your site or individual trades. 1. Simple history Simple history is a collection of total summaries written each day at midnight.

te3:hourly

Anonymous (anonymous@undisclosed.example.com) — 2014-12-12T06:23:55+00:00

Hourly “Hourly” menu displays hourly stats for all your trades arranged in 24 columns, one for each hour and an additional summary column. Current hour is marked with grey color and bolded text. Stats get recalculated every minute (calculation is triggered by

te3:https

Anonymous (anonymous@undisclosed.example.com) — 2017-01-06T16:21:18+00:00

Tracking traffic and HTTPS Over the past few years we are seeing a gradual shift from websites using HTTP (Hypertext Transfer Protocol) to HTTPS (Hypertext Transfer Protocol Secure). HTTPS protocol enables secure connections and also brings potential positive SEO implications.

te3:index_of_topics

Anonymous (anonymous@undisclosed.example.com) — 2017-01-06T16:23:29+00:00

Index of topics GETTING STARTED * Logging in * Change password TRACKING TRAFFIC * Incoming tracking * Outgoing tracking * Customizing and renaming * Tracking traffic and HTTPS ADMIN PANEL * Admin panel introduction * Overview (main menu) * Hourly menu * History menus * Quick stats * Interface manager * Server load logs * Time zone * Trash TOPLISTS * Index & Templates * Descriptions * Images * Thumb grabber ADDING TRADES * Admin * Add …

te3:installation

Anonymous (anonymous@undisclosed.example.com) — 2016-03-18T18:33:24+00:00

Installation Installation is fairly simple and it should only take a few minutes of your time. * If you haven't already, register to obtain username and password. * Navigate to and download the installation package. * For your TE3 installation you will have to create a new directory inside your

te3:interface_manager

Anonymous (anonymous@undisclosed.example.com) — 2014-11-20T18:55:05+00:00

Interface manager Interface is a customized selection of data columns displayed in the Stats table. TE3 “Interface manager” enables you to create various interfaces corresponding to your traffic trading actions, switch between them with just one click, or edit them at any time.

te3:interface_manager_available_parameters

Anonymous (anonymous@undisclosed.example.com) — 2016-03-30T12:31:13+00:00

Available parameters TE can display a vast amount of data for your trades. Just select parameters you wish to survey and enable them using the Interface manager. They are organized into 13 sections: * Action * Last 60 minutes * Last 24 hours * Last 7 days * Forces * Capping * Main * Personal * Proxy * Mobile * No JS * Rank *

te3:ip_block_list

Anonymous (anonymous@undisclosed.example.com) — 2016-03-18T22:42:45+00:00

IP block list module * IP block list * Auto blocking * IP whitelist TE3 logs IP addresses of all surfers who have visited your site over the past 24 hours. IPs that produced the most clicks get listed in the Cheat logs window, which greatly simplifies detection of repetetive occuring IPs and other types of abnormal traffic activities.

te3:ip_lookup

Anonymous (anonymous@undisclosed.example.com) — 2014-11-24T05:41:22+00:00

IP lookup Click on the individual IP address to open the “IP lookup” window and inspect a detailed description of that IP. “IP lookup” can be activated from the Cheat logs window, System logs window, Link detailed window and from the IP block list. Visual presentation IP IP address

te3:link_report

Anonymous (anonymous@undisclosed.example.com) — 2014-11-24T05:38:23+00:00

Link report Menus: Overview, Hourly, Pages Find out where on your site surfers are clicking the most. Label certain categories of links on your site, e.g., toplist, thumbs, text links, sponsors and so on. If you have added l=name parameter to your outgoing links, link report stats are being tracked automatically and you can view stats for each name.

te3:login_page

Anonymous (anonymous@undisclosed.example.com) — 2014-12-03T17:55:55+00:00

Login page Login page can be found on this URL: http://www.yoursite.com/your_TE3_directory/ To login, enter username admin and password that was e-mailed to you. If you enter wrong user & pass combination for more than 3 times, you'll have to pass challenge-response test, used to ensure that the login is not generated by a computer.

te3:mailer

Anonymous (anonymous@undisclosed.example.com) — 2014-12-12T10:28:03+00:00

Mailer Menu: Settings / Mailer “Mailer” can be set to send e-mail notifications based on different events and conditions. ---------- Scheduler settings Template driven Stats report can be e-mailed to you periodically at certain times or dates set in the

te3:manual

Anonymous (anonymous@undisclosed.example.com) — 2015-08-09T11:49:48+00:00

User manual Our detailed user manual should help you fully understand the flexibility and potential.For those impatient, we have prepared quick start section. ---------- Basics * Getting started * What is traffic trading? * Installation * Quick start * Migrating from TE 2.2 to TE 3.0 * External pages * Login page *

te3:mass_edit

Anonymous (anonymous@undisclosed.example.com) — 2014-12-12T08:44:46+00:00

Mass edit panel “Mass edit panel” allows you to perform the same action (edit, reset, delete...) on multiple trades at the same time. Check box trades in the stats table and “Mass edit panel” will automatically slide-up from the bottom.

te3:migrating

Anonymous (anonymous@undisclosed.example.com) — 2014-12-11T18:49:11+00:00

Migrating from TE 2.2 to TE 3.0 Assuming you have already successfully installed TE 3.0 and logged in. * Import data: Go to the “settings / general settings” menu and use TE2.2 to TE3 importer. Importer will import the following data from the 2.2 version: trades,

te3:network

Anonymous (anonymous@undisclosed.example.com) — 2016-05-09T06:22:24+00:00

Network If you have two or more websites managed by TE3, you will definitely want to link them together into a “Network”. You'll be able to monitor and control multiple sites from the “Network” menu, as well as sync almost any action you perform on one site to your other sites.

te3:network_link

Anonymous (anonymous@undisclosed.example.com) — 2014-11-24T08:43:27+00:00

How to link sites together In this example we will link two sites together (we'll use fictitious site 1 and site 2 for the purpose of the example): Step by step Login into the TE3 admin interface on both site1.com and site2.com and navigate to the “Network”

te3:network_parameters

Anonymous (anonymous@undisclosed.example.com) — 2014-11-25T06:19:59+00:00

Available parameters - "Network" menu Select parameters you wish to survey and enable them using the Interface manager. They are organized into 11 sections: * Action * Last 60 mins * Last 24 hours * Last 7 days * Forces * Script info * System trades * Proxy * Mobile * GNB * No JS Action Parameter Description C: mass select all you trades or

te3:network_sync

Anonymous (anonymous@undisclosed.example.com) — 2014-11-13T07:11:17+00:00

Network sync TE3 is designed to make your traffic trading as simple, fast and efficient as possible. If you have two or more websites linked into a Network, you can sync almost any action you perform on one site to your other sites. Most of TE3 pop-up windows are equipped with a

te3:niches

Anonymous (anonymous@undisclosed.example.com) — 2014-11-14T17:47:40+00:00

Niches * How does it work * Manage niches Using “niches” feature will enable you to target your traffic, which should increase the productivity of surfers you send to your trade partners (external productivity) and consequently also your (internal) productivity.

te3:no_js

Anonymous (anonymous@undisclosed.example.com) — 2014-11-24T14:02:21+00:00

No JS TE3 can check for visitors who surf with disabled JavaScript, which can help you detect abnormal traffic (cheat bots, etc.). “JS checker” is disabled by default. You can enable it in Settings / General settings / Main. ---------- How to use No JS stats

te3:outgoing

Anonymous (anonymous@undisclosed.example.com) — 2015-04-29T05:20:19+00:00

Outgoing tracking To configure outgoing tracking, you'll have to modify all clickable links on your site, to pass through the /your_te3_directory/out.php. Note, we'll be using your_te3_directory in our “User manual”, be sure to replace it with the actual directory name

te3:outgoing_lists

Anonymous (anonymous@undisclosed.example.com) — 2014-12-04T06:28:07+00:00

Outgoing lists Menu: Settings / Outgoing list Modifying “Outgoing list” settings can have a huge impact on the outgoing traffic distribution. If not set properly, traffic on your site could decrease. Before you apply any changes, read this topic very carefully.

te3:outgoing_redirections

Anonymous (anonymous@undisclosed.example.com) — 2014-12-11T08:03:37+00:00

Outgoing redirections Menu: Settings / Outgoing redirections If “Outgoing redirections” are not configured properly, your overall traffic could potentially decrease. Before appying any changes, read this topic and the related system trades topic very carefully.

te3:overview

Anonymous (anonymous@undisclosed.example.com) — 2014-12-12T06:42:40+00:00

Overview “Overview” is your main working area and is designed to give you a general overview of your trades and their stats, as well as multiple possibilities of various modifications and customizations. ---------- Toolbar Overview Toolbar directly below

te3:pseudo_cron

Anonymous (anonymous@undisclosed.example.com) — 2014-11-26T07:00:51+00:00

Pseudo-cron Most trade scripts use a “cron daemon” to periodically execute their cron.php module, which means you need to be familiar with at least basic “shell commands” to perform the installation. TE3 uses in.php method instead - we call this method

te3:quick_start

Anonymous (anonymous@undisclosed.example.com) — 2014-12-03T17:49:29+00:00

Quick start Assuming you have just completed installation successfully, you might want to do things in the following order: * Login URL: You can login at http://www.yoursite.com/your_TE3_directory/ * Change password: If you would like to change your password, click on the

te3:quick_stats

Anonymous (anonymous@undisclosed.example.com) — 2014-12-12T06:46:06+00:00

Quick stats Although TE offers numerous methods of organizing and customizing data for your trades (switching between menus, creating interfaces), the quantity of data displayed can still be hard to overview (especially if you have a large number of trades). “Quick stats

te3:ratios

Anonymous (anonymous@undisclosed.example.com) — 2014-11-13T07:16:16+00:00

Ratios Visual presentation Navigate to overview menu, edit desired trade and expand “advanced” accordion. Ratio Ratios are relative to each other. Important thing to know about ratios is that only the relation between them matters. You can give a selected trade advantage or disadvantage over other trades.

te3:referrer_productivity

Anonymous (anonymous@undisclosed.example.com) — 2014-12-04T08:26:52+00:00

Referrer productivity If you decide to buy traffic you should get the most out of your money. There is no “good” or “bad” traffic to buy, there is just traffic that is productive for your site and traffic that isn't. The problem is you can't know what works well for you in advance (and neither can your broker). With

te3:server_load

Anonymous (anonymous@undisclosed.example.com) — 2014-08-08T11:38:57+00:00

Server load Menu: Header / Server load Server load button displays server load averages for the last 1, 5 and 15 minutes. Click on the button to open the “Server load” pop-up window and inspect server load history, updated every minute - each time

te3:server_move

Anonymous (anonymous@undisclosed.example.com) — 2015-04-30T14:15:27+00:00

Server move (how to move your TE3 to a new server) To preserve all the data, you will have to copy te3 directory inside html directory from your old server to your new server. There are several methods how this can be done, we'll describe just one of them here:

te3:signup

Anonymous (anonymous@undisclosed.example.com) — 2015-08-18T17:58:31+00:00

Trade sign-up page “Trade sign-up page” is an external page where webmasters can sign-up for a trade with your site. It can be found here: http://www.yoursite.com/your_te3_directory/signup.php You can configure and control “Trade sign-up page

te3:signup_settings

Anonymous (anonymous@undisclosed.example.com) — 2014-11-26T08:39:22+00:00

te3:skimming

Anonymous (anonymous@undisclosed.example.com) — 2015-06-08T06:59:55+00:00

Skimming Skim is already set to default skim for all outgoing links on your site. You can set ”internal skim” for individual trades or system trades (any or all) and it will outpower “default skim” for those trades. If you set ”external skim” ( s=X directly in the outgoing link ) it will also have priority over “default skim” (but not over “internal skim”).

te3:system_info

Anonymous (anonymous@undisclosed.example.com) — 2016-05-06T07:40:44+00:00

System info Menu: Maintenance / System info “System info” module is used to track and provide various system related information. It also generates incoming tracking code with your_TE3_directory and yourdomain.com already inserted. Since you can install TE3 on various types of setups, there are several incoming tracking codes available. Select the code according to your setup and add it on all pages that receive traffic. Only use one type of tracking code.

te3:system_logs

Anonymous (anonymous@undisclosed.example.com) — 2014-11-13T14:00:30+00:00

System logs Menu: Tools / System logs “System logs” module displays a chronological report of operations realated to your TE3. Inspect which operations were performed and by what module. Visual presentation [| 1. |] Date Date and time of the operation. Records are listed chronologically.

te3:time_zone

Anonymous (anonymous@undisclosed.example.com) — 2014-11-10T12:01:20+00:00

Time zone Menu: Header / Time zone Although not necessary, we advise you to set time zone in accordance with your location - it controls all date/time related functions in TE3 script (stats and graphs, logs...) To edit time zone click on the Date and time

te3:toplist

Anonymous (anonymous@undisclosed.example.com) — 2014-11-17T05:57:14+00:00

Toplist “Toplist” is a collection of trades in your database that may be ranked in a number of different ways, e.g., by: raws, uniques, clicks, outgoing hits, productivity, value, owed ratio and so on. Number of toplists you can create is basically unlimited.

te3:toplist_descriptions

Anonymous (anonymous@undisclosed.example.com) — 2014-12-11T08:25:04+00:00

Toplist descriptions In addition to the Site name, you can also add a Description (even multiple) for each active and inactive trade. The difference between the two is that “Description” is usually longer and more detailed. Both parameters can be displayed in the same

te3:toplist_images

Anonymous (anonymous@undisclosed.example.com) — 2014-12-11T08:23:06+00:00

Toplist images In the “Toplist images” menu you can view and manage images downloaded by the Thumb grabber. Based on these images, you can create a “Thumb toplist”. There is an alternative method to manage “Images”. Navigate to the Overview menu, click Edit icon for a desired trade and expand

te3:toplist_include

Anonymous (anonymous@undisclosed.example.com) — 2014-11-17T06:11:12+00:00

How to include toplist into your web page After you have created and added a toplist, it has to be included into your web page: * PHP (.php pages) * SSI (.shtml pages)

te3:toplist_index

Anonymous (anonymous@undisclosed.example.com) — 2016-05-09T06:21:26+00:00

Templates “Toplist” is a collection of trades in your database that may be ranked in a number of different ways, e.g., by: raws, uniques, clicks, outgoing hits, productivity, value, owed ratio and so on. Number of toplists you can create is basically unlimited.

te3:toplist_input

Anonymous (anonymous@undisclosed.example.com) — 2014-11-17T06:12:37+00:00

How to input new toplists You can choose between two different input methods in the “Add new toplist” window: 1. Form input (Web) To add toplist template directly from the admin interface, select method from the toolbar of the“Add new”

te3:toplist_thumb_grabber

Anonymous (anonymous@undisclosed.example.com) — 2014-11-17T06:05:55+00:00

Thumb grabber “Thumb grabber” module can be set to crawl trades in your database every x hours and to download a specified amount of thumbs from trader's web site. You can also manually trigger thumb grabber by clicking on the button. Thumbs are stored into the

te3:toplist_tutorial1

Anonymous (anonymous@undisclosed.example.com) — 2014-11-17T06:08:02+00:00

Create a text toplist We'll be using three fictitious trades (http://www.yourtrade1.com/, http://www.yourtrade2.com/ and http://www.yourtrade1.com/) for the purpose of this tutorial. If your database is empty at this stage, add three of your trades. If your database includes more than three trades, your results will differ from ours.

te3:toplist_tutorial2

Anonymous (anonymous@undisclosed.example.com) — 2014-11-17T06:15:32+00:00

Create a description toplist We'll be using three fictitious trades (http://www.yourtrade1.com/, http://www.yourtrade2.com/ and http://www.yourtrade1.com/) for the purpose of this tutorial. If your database is empty at this stage, add three of your trades. If your database includes more than three trades, your results will differ from ours.

te3:toplist_tutorial3

Anonymous (anonymous@undisclosed.example.com) — 2014-11-17T06:20:00+00:00

Create a thumb toplist We'll be using three fictitious trades (http://www.yourtrade1.com/, http://www.yourtrade2.com/ and http://www.yourtrade1.com/) for the purpose of this tutorial. If your database is empty at this stage, add three of your trades. If your database includes more than three trades, your results will differ from ours.

te3:toplist_tutorial4

Anonymous (anonymous@undisclosed.example.com) — 2014-11-17T06:13:38+00:00

Create a history toplist We'll be using three fictitious trades (http://www.yourtrade1.com/, http://www.yourtrade2.com/ and http://www.yourtrade1.com/) for the purpose of this tutorial. If your database is empty at this stage, add three of your trades. If your database includes more than three trades, your results will differ from ours.

te3:toplist_tutorial5

Anonymous (anonymous@undisclosed.example.com) — 2014-12-05T08:18:28+00:00

Filter description toplist by niche You already know how to create a description toplist. Let's filter this toplist by niche: We'll be using ten fictitious trades (http://www.yourtrade1.com/, http://www.yourtrade2.com/, http://www.yourtrade1.com/, ...) for the purpose of this tutorial. If your database is empty at this stage,

te3:trade_types

Anonymous (anonymous@undisclosed.example.com) — 2014-12-12T08:22:49+00:00

Trade types Due to the complexity and constant fluctuations of traffic trading process, it would be impractical to manage all your trades under one category. Some trades are active, some inactive, sometimes you are buying or selling traffic, some of your visitors are referred to your site by search engines, some come through bookmarks

te3:trash

Anonymous (anonymous@undisclosed.example.com) — 2014-12-12T05:52:49+00:00

Trash Trash button opens a “Trades in trash” window and is available in the Overview and Hourly menus. When you delete trades using Edit trade or Mass edit trade, you can delete them completely or you can choose to move them to trash (by checkboxing the Move to trash option). “Trades in trash

te3:update_manager

Anonymous (anonymous@undisclosed.example.com) — 2014-12-04T05:37:05+00:00

Update manager Menu: Maintenance / Update manager Your TE3 will periodically check for updates (once a day). If there is an update available, there will be an exclamation icon displayed next to Maintenance drop down menu: There are two methods for updating TE:

te3:user_manager

Anonymous (anonymous@undisclosed.example.com) — 2014-12-02T20:29:30+00:00

User manager Menu: User / User manager “Manage user” window allows you to change password, set primary e-mail address (by default, this is the same e-mail that you have used for installation) and IP protect your admin interface. If you ever forget your password, use