Differences

This shows you the differences between two versions of the page.

--- te3:ip_block_list [2014/08/21 11:28] – moderator
+++ te3:ip_block_list [2016/03/18 22:42] (current) – [IP block list module] moderator
@@ Line 1: / Line 1: @@
 ====== IP block list module ======
+~~NOTOC~~
-{{INLINETOC}}
+  * [[te3:ip_block_list#IP block list|IP block list]]
+  * [[te3:ip_block_list#Auto blocking|Auto blocking]]
+  * [[te3:ip_block_list#IP whitelist|IP whitelist]]
-TE3 logs IP addresses of all surfers who have visited your site over the past 24 hours. IPs that produced the most clicks get listed in the [[te3:quick_stats#Available options|Cheat logs]] window, which greatly simplifies detection of repetetive occuring IPs and other types of abnormal traffic activities.
+TE3 logs IP addresses of all surfers who have visited your site over the past 24 hours. IPs that produced the most clicks get listed in the [[te3:cheat_logs|Cheat logs]] window, which greatly simplifies detection of repetetive occuring IPs and other types of abnormal traffic activities.
-IP block list module is a part of TE3 [[te3:anti_cheat|anti-cheat]] features. It allows you to manually block IPs you decide to be suspicious, to automatically block IPs based on settings you determine and to allow exceptions for IP addresses of your choice.
+IP block list module is a part of TE3 anti-cheat features. It allows you to manually block IPs you decide to be suspicious, to automatically block IPs based on settings you determine and to allow exceptions for IP addresses of your choice.
 ----
@@ Line 15: / Line 18: @@
 "IP block list" contains a list of blocked IP addresses. Surfers with IPs listed on the “IP block list” are counted under system trade [[te3:outgoing_redirections#Blocked|“blocked”]].
-Note, that IPs listed on the "IP block list" are not blocked from your site completely. By default blocked traffic doesn't get skimmed / sent to trades, it is sent to content (URL behind [[te3:outgoing|''u='', ''purl='']] parameters). If you would prefer to send blocked traffic to a specified URL, navigate to Settings / [[te3:outgoing_redirections|Outgoing redirections]], and enable outgoing redirections for the system trade "Blocked" (not recommended).
+Note, that IPs listed on the "IP block list" are not blocked from your site completely. By default blocked traffic doesn't get skimmed / sent to trades, it is sent to content (URL behind [[te3:outgoing|''u='', ''purl='']] parameters). If you would prefer to send blocked traffic to a specified URL, navigate to {{:te3:settings_logo.png?nolink|}} Settings / [[te3:outgoing_redirections|Outgoing redirections]], and enable outgoing redirections for the system trade "Blocked" (not recommended).
-{{:te3:ip_blocklist_2.png?nolink|}}
+=== Visual presentation ===
+{{:te3:ip_blocklist6.png?nolink|}} \\
 |< 100% 3% 20% 77% >|
 ^ # ^ Action ^ Description ^
@@ Line 24: / Line 28: @@
 | 2. | ''IP block list'' | switch to "IP block list" module. |
 | 3. | ''Auto blocking'' | switch to [[te3:ip_block_list#auto blocking|Auto blocking]] module. |
-| 4. | ''IP whitelist'' | switch to [[te3:ip_block_list#IP whitelist|IP whitelist]] module. |
+| 4. | ''IP whitelist'' | switch to [[te3:ip_block_list#IP whitelist|IP whitelist]] module. | \\
- \\ \\
+{{:te3:ip_blocklist7.png?nolink|}}
-{{:te3:ip_blocklist_4.png?nolink|}}
 |< 100% 3% 20% 77% >|
 ^ # ^ Action ^ Description ^
 | 1. | ''Checkbox'' | you can checkbox one or multiple records for manipulation. There is a ''mass checkbox'' option - click on it to select or deselect all entries. |
-| 2. | ''Successive number'' | successive number of a record. |
+| 2. | ''IP address'' | click on the individual IP to open the [[te3:ip_lookup|IP lookup window]] and inspect a detailed description of that IP address. This information is provided via a [[http://www.webhostingbuzz.com/wiki/what-is-whois-search/|whois]] command. |
-| 3. | ''IP address'' | click on the individual IP to open the [[te3:ip_lookup|IP lookup window]] and inspect a detailed description of that IP address. This information is provided via a [[http://www.webhostingbuzz.com/wiki/what-is-whois-search/|whois]] command. |
+| 3. | ''Raw'', ''Clk TG'', ''Out T'' | sort "IP block list" acording to [[te3:interface_manager_available_parameters#Last 60: minutes|''Raw'', ''Clk TG'' or ''Out T'']] hits for the last 24 hours. |
-| 4. | ''Raw'', ''Clk TG'', ''Out T'' | sort "IP block list" acording to [[te3:interface_manager_available_parameters#Last 60: minutes|''Raw'', ''Clk TG'' or ''Out T'']] hits for the last 24 hours. |
+| 4. | ''Time added'' | time elapsed from the moment you added the record to the "Ip block list". Place your cursor over the table cell to inspect the date an time the respective record was added to the "IP blocklist".  |
-| 5. | ''Time added'' | time elapsed from the moment you added the record to the "Ip block list". Place your cursor over the table cell to inspect the date an time the respective record was added to the "IP blocklist".  |
+| 5. | ''Time expire'' | time remaining until a record will be removed from the "IP block list". Place your cursor over the table cell to inspect the date and time at which the respective record will be deleted by the [[te3:pseudo_cron|Pseudo-cron]].  |
-| 6. | ''Time expire'' | time remaining until a record will be removed from the "IP block list". Place your cursor over the table cell to inspect the date and time at which the respective record will be deleted by the [[te3:pseudo_cron|Pseudo-cron]].  |
+| 6. | ''Proxy detect'' | if [[te3:outgoing_redirections#proxy|proxy]] was detected using environment variables, ''Yes'' will appear in the field, otherwise the field will be empty. |
-| 7. | ''Proxy detect'' | if [[te3:outgoing_redirections#proxy|proxy]] was detected using environment variables, ''Yes'' will appear in the field, otherwise the field will be empty. |
+| 7. | ''Add record'' | to add a record, click {{:te3:add_button.png?nolink|}} and open a "Manually add IP(s) to IP Block list" pop-up window. You can add one or multiple IPs at the same time. To enter multiple IPs, add one IP per line. You can add a whole IP block to the list as well (x. - A block, x.x. - B block, x.x.x. - C block). If the last character in the string is ''.'' (dot), a whole block will be blocked. Select ''Block time'' and click ''Add''. \\ <color grey>Note, that ''Raw'', ''Clk TG'' and ''Out T'' are not available (''N/A'') for records you have added manually.</color> |
-| 8. | ''Country'' | country name. |
+| 8. | ''Delete record'' | click {{:te3:backup_delete.png?nolink|}} to delete selected record. |
-| 9. | ''Add record'' | to add a record, click {{:te3:add_button.png?nolink|}} and open a "Manually add IP(s) to IP Block list" pop-up window. You can add one or multiple IPs at the same time. To enter multiple IPs, add one IP per line. You can add a whole IP block to the list as well (x. - A block, x.x. - B block, x.x.x. - C block). If the last character in the string is . (dot), a whole block will be blocked. Select ''Block time'' and click ''Save''. \\ <color grey>Note, that ''Raw'', ''Clk TG'' and ''Out T'' are not available (''N/A'') for records you have added manually.</color> |
-| 10. | ''Delete record'' | click {{:te3:backup_delete.png?nolink|}} to delete selected record. |
- \\ \\
-{{:te3:ip_blocklist5.png?nolink|}}
+{{:te3:ip_blocklist8.png?nolink|}}
 |< 100% 3% 20% 77% >|