User Tools

Site Tools


te3:interface_manager_available_parameters

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
te3:interface_manager_available_parameters [2014/08/21 08:59] – [Rank:] moderatorte3:interface_manager_available_parameters [2016/03/30 12:31] (current) – [Capping] moderator
Line 1: Line 1:
 ====== Available parameters ====== ====== Available parameters ======
 +~~NOTOC~~
  
 TE can display a vast amount of data for your trades. Just select parameters you wish to survey and enable them using the [[te3:interface_manager|Interface manager]]. They are organized into 13 sections: TE can display a vast amount of data for your trades. Just select parameters you wish to survey and enable them using the [[te3:interface_manager|Interface manager]]. They are organized into 13 sections:
 +  * [[te3:interface_manager_available_parameters#action|Action]]
 +  * [[te3:interface_manager_available_parameters#Last 60 minutes|Last 60 minutes]]
 +  * [[te3:interface_manager_available_parameters#Last 24 hours|Last 24 hours]]
 +  * [[te3:interface_manager_available_parameters#Last 7 days|Last 7 days]]
 +  * [[te3:interface_manager_available_parameters#Forces|Forces]]
 +  * [[te3:interface_manager_available_parameters#Capping|Capping]]
 +  * [[te3:interface_manager_available_parameters#Main|Main]]
 +  * [[te3:interface_manager_available_parameters#Personal|Personal]]
 +  * [[te3:interface_manager_available_parameters#Proxy|Proxy]]
 +  * [[te3:interface_manager_available_parameters#Mobile|Mobile]]
 +  * [[te3:interface_manager_available_parameters#No JS|No JS]]
 +  * [[te3:interface_manager_available_parameters#Rank|Rank]]
 +  * [[te3:interface_manager_available_parameters#GNB|GNB]]
 +
  
-{{INLINETOC}} 
  
-You can edit certain parameters directly from the Overview [[te3:admin_panel#Stats window|Stats window]] by clicking on a preferred table cell (mouse pointer turns into a hand over parameters you can edit). Naturally you can only edit parameters related to settings and values, the rest are provided by TE3 (calculated form your traffic).+You can edit certain parameters directly from the Overview [[te3:admin_panel#Stats table|Stats table]] by clicking on a preferred table cell (mouse pointer turns into a hand over parameters you can edit). Naturally you can only edit parameters related to settings and values, the rest are provided by TE3 (calculated form your traffic).
  
-==== Action====+===== Action =====
  
  
Line 20: Line 33:
 ---- ----
  
-==== Last 60minutes ====+===== Last 60 minutes =====
  
  
Line 54: Line 67:
 ---- ----
  
-==== Last 24hours ====+===== Last 24 hours =====
 Same categories as [[te3:interface_manager_available_parameters#Last 60: minutes|Last 60 minutes.]] Same categories as [[te3:interface_manager_available_parameters#Last 60: minutes|Last 60 minutes.]]
  
 ---- ----
  
-==== Last 7days ====+===== Last 7 days =====
 Same categories as [[te3:interface_manager_available_parameters#Last 60: minutes|Last 60 minutes.]] Same categories as [[te3:interface_manager_available_parameters#Last 60: minutes|Last 60 minutes.]]
  
 ---- ----
  
-==== Forces====+===== Forces =====
  
 |< 100% 14% 7% 79% >| |< 100% 14% 7% 79% >|
Line 77: Line 90:
 ---- ----
  
-==== Capping====+===== Capping =====
  
 |< 100% 14% 7% 79% >| |< 100% 14% 7% 79% >|
 ^ Parameter ^ Type ^ Description ^ ^ Parameter ^ Type ^ Description ^
 | ''Min prod'': | Editable | trades with productivity (Prod TG) lower than “min product” will be suspended. Enter 0.00 to disable this cap type.  |  | ''Min prod'': | Editable | trades with productivity (Prod TG) lower than “min product” will be suspended. Enter 0.00 to disable this cap type.  | 
-| ''Max prod'': | Editable | this option only works in combination with value trade type. Trades with Prod TG higher than maximum productivity, will get returns based on maximum productivity. Enter 0.00 to disable this cap type. |  +| ''Max prod'': | Editable | this option only works in combination with "Value" [[te3:algorithms|algorithm]]. Trades with Prod TG higher than maximum productivity, will get returns based on maximum productivity. Enter 0.00 to disable this cap type. |  
 | ''Min size'': | Editable | if trade size (Raws or Clk TG) is smaller than “min size” set, trade will be suspended. For obvious reason, trade has to be in the database for at least 24 hours to become a candidate for this cap type. If you reset the trade, it will again take 24 hours before this cap type is in effect. Enter 0 to disable this cap type. |  | ''Min size'': | Editable | if trade size (Raws or Clk TG) is smaller than “min size” set, trade will be suspended. For obvious reason, trade has to be in the database for at least 24 hours to become a candidate for this cap type. If you reset the trade, it will again take 24 hours before this cap type is in effect. Enter 0 to disable this cap type. | 
 | ''Max out size'': | Editable | if outgoing traffic for a trade is greater than “max out size” set, trade will be suspended until outgoing traffic will decrease below “Max out size”. For obvious reason, trade has to be in the database for at least 24 hours to become a candidate for this cap type. If you reset the trade, it will again take 24 hours before this cap type is in effect. Enter 0 to disable this cap type. |  | ''Max out size'': | Editable | if outgoing traffic for a trade is greater than “max out size” set, trade will be suspended until outgoing traffic will decrease below “Max out size”. For obvious reason, trade has to be in the database for at least 24 hours to become a candidate for this cap type. If you reset the trade, it will again take 24 hours before this cap type is in effect. Enter 0 to disable this cap type. | 
Line 92: Line 105:
 ---- ----
  
-==== Main====+===== Main =====
  
 |< 100% 14% 7% 79% >| |< 100% 14% 7% 79% >|
Line 105: Line 118:
 | ''Start raws'': | Editable | this option is active only for [[te3:add_trade_single#Advanced accordion|unapproved trades]]. Incoming raw hits from that trade must exceed this number in order to get any return traffic. Enter ''0'' into the field to disable this feature. |  | ''Start raws'': | Editable | this option is active only for [[te3:add_trade_single#Advanced accordion|unapproved trades]]. Incoming raw hits from that trade must exceed this number in order to get any return traffic. Enter ''0'' into the field to disable this feature. | 
 | ''Start clicks'': | Editable | this option is active only for [[te3:add_trade_single#Advanced accordion|unapproved trades]]. Clk TG (clicks to trades + galleries) from that trade must exceed this number in order to get any return traffic. Enter ''0'' into the field to disable this feature. |  | ''Start clicks'': | Editable | this option is active only for [[te3:add_trade_single#Advanced accordion|unapproved trades]]. Clk TG (clicks to trades + galleries) from that trade must exceed this number in order to get any return traffic. Enter ''0'' into the field to disable this feature. | 
-| ''Skim pattern'': | Editable | skim is set to [[te3:default_skimming|default skim]] by default. You can set [[te3:skimming#Internal skim|internal skim]] for individual trades or system trades (any or all) and it will outpower "default skim" for those trades. Click on the table cell and enter the preferred skim pattern for the respective (system) trade. If you set [[te3:skimming#External skim|external skim]] ( ''s=X'' directly in the outgoing link ) it will also have priority over "default skim" (but not over "internal skim"). | +| ''Skim pattern'': | Editable | skim is set to [[te3:default_skimming|default skim]] by default. You can set [[te3:skimming#Internal skim|internal skim]] for individual trades or system trades (any or all) and it will outpower "default skim" for those trades. Click on the table cell and enter the preferred skim or skim pattern for the respective (system) trade. If you set [[te3:skimming#External skim|external skim]] ( ''s=X'' directly in the outgoing link ) it will also have priority over "default skim" (but not over "internal skim"). | 
 | ''Site name'': | Editable | site name can be displayed in your [[te3:toplist|toplist]]. |  | ''Site name'': | Editable | site name can be displayed in your [[te3:toplist|toplist]]. | 
 | ''Return URL'': | Editable | URL where return traffic will be sent to. |  | ''Return URL'': | Editable | URL where return traffic will be sent to. | 
Line 115: Line 128:
 ---- ----
  
-==== Personal====+===== Personal =====
  
 |< 100% 14% 7% 79% >| |< 100% 14% 7% 79% >|
Line 125: Line 138:
 ---- ----
  
-==== Proxy====+===== Proxy =====
  
 |< 100% 14% 7% 79% >| |< 100% 14% 7% 79% >|
 ^ Parameter ^ Type ^ Description ^ ^ Parameter ^ Type ^ Description ^
-| ''In'': | Provided | number of incoming [[te3:outgoing_redirections#proxy|proxy]] hits based on the environment variables (HTTP_VIA and HTTP_X_FORWARDED). | +| ''In'': | Provided | number of incoming [[te3:outgoing_redirections#proxy|proxy]] raw hits based on the environment variables (HTTP_VIA and HTTP_X_FORWARDED). {{:te3:proxy.png?100direct|}} 
 | ''In %'': | Provided | incoming proxy traffic in percents, based on the environment variables. |  | ''In %'': | Provided | incoming proxy traffic in percents, based on the environment variables. | 
 | ''Clk'': | Provided | number of proxy clicks based on the environment variables. |  | ''Clk'': | Provided | number of proxy clicks based on the environment variables. | 
Line 136: Line 149:
 ---- ----
  
-==== Mobile====+===== Mobile =====
 Same categories as "Proxy" Same categories as "Proxy"
  
Line 142: Line 155:
 ---- ----
  
-==== No JS====+===== No JS =====
  
 |< 100% 14% 7% 79% >| |< 100% 14% 7% 79% >|
Line 149: Line 162:
 | In% | Provided | percent of incoming raw hits produced by surfers with JavaScript disabled (In / Raw). | | In% | Provided | percent of incoming raw hits produced by surfers with JavaScript disabled (In / Raw). |
  
 +Read more about No JS [[te3:no_js|here]].
  
 ---- ----
  
-==== Rank====+===== Rank =====
  
 |< 100% 14% 7% 79% >| |< 100% 14% 7% 79% >|
Line 161: Line 175:
 ---- ----
  
-==== GNB====+===== GNB =====
  
 |< 100% 14% 7% 79% >| |< 100% 14% 7% 79% >|
te3/interface_manager_available_parameters.1408611590.txt.gz · Last modified: 2014/08/21 08:59 (external edit)

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki